岳把我用嘴含进满足我视频,国产精品av,日产乱码一二三区别免费必看,欧美亚洲自偷自拍 在线

EPC Construction NDT
Construction NDT
Avoid expensive concrete repairs - Force Technology
Add Time：2019-04-12 View Count：2060 Resoure:EPC
Avoid expensive concrete repairs
Apply “power” to the reinforcement

Many reinforced concrete structures suffer from premature degradation. The most widespread cause has been found to be chloride contamination of the concrete at the level of the steel reinforcement. Cathodic protection is an established repair method for reinforced concrete.





Chloride contamination
Often the chloride has come from the structures environ- ment such as marine conditions, de-icing salts or swimming pool disinfectant. The presence of chloride does not nor- mally directly affect the concrete but allows corrosion of the steel reinforcement to occur. This corrosion is normally prevented by the alkaline nature of the concrete.

There are several approaches to stop ongoing corrosion of steel reinforcement in concrete which is contaminated with chloride. The simplest and most direct solution is to demol- ish the structure and replace with a new, and hopefully, improved construction. Another approach is to remove the areas of concrete where the chloride concentration is great- est and replace with uncontaminated mortar or concrete.



Why cathodic protection?
Cathodic protection of an existing structure does not re- quire that the concrete or masonry is removed which has important implications for the strength of the structure or in buildings its listing, which requires you to keep the structure as original as possible. The effectiveness of cathodic protec- tion is well documented with various European standards defining how effective it is in preventing future corrosion.
  • The durAnode® system can be completely hidden. Thus it can be used in historic buildings to protect steel girders.


DurAnode4 standard
The durAnode4 consist of an anode head and an active anode. The active anode can be made in any length from 50 mm to several meters.



 

Why the durAnode system is a world leader?
The hardest part of applying the CP to a concrete and masonry structure is finding a suitable anode material and design as there are many particular requirements and the concrete or stone is a relatively poor electrical conductor. Over the last 50 years many types of anodes have been tried in many different countries. The durAnode is the only an- ode system to have been evolved over a long period of time and is now in its fourth generation.



Advantages
  • The durAnode® system can be installed using few tools: cover meter, hammer drill.
  • The durAnode® system does not increase the weight and dimension of the structure. This is of particular importance in car parks where the height is very lim- ited and on some type of bridges.

Several durAnodes can be connected on a single feeder wire which reduces the installation work.

The durAnode4 has a build-in pre-resistor to prevent short of all anodes on a string in case of one single short, and off- sets the output in concrete with various conductivity which reduces the number of zones.

The durAnode4 has a screw of Titanium that penetrates the insulation and makes a connection to the feeder wire. This means that the wire shall not be stripped but just placed in the anode top.



DurAnode4 vertical

The durAnode4 is designed to be mounted in the soffit of structures. The interference fit plug has a hole in it through which the grout is injected with a syringe. The clear plastic pipe allows the air to escape and leave a vacuum holding the grout until it cures.

The durAnode4 has a titanium grub screw that penetrates the insulation and makes a connection to the coated feeder wire. This means that the feeder wire does not have to be stripped.

A special torque screwdriver and spanner are made by CP International for the connection

The durAnode4 can be made in any length from 50mm to several meters.

The durAnode4 has a built in pre-resistor which can have several resistances depending on the anodes length.
Recommended
主站蜘蛛池模板： 霍州市| 舟曲县| 赞皇县| 瓦房店市| 叶城县| 屏山县| 金湖县| 临夏市| 西乌珠穆沁旗| 昌平区| 海城市| 习水县| 大厂| 博乐市| 出国| 桦南县| 霍州市| 乌审旗| 康平县| 噶尔县| 凤城市| 海南省| 托里县| 墨江| 东港市| 五寨县| 台南县| 民勤县| 临桂县| 上饶市| 温州市| 沙湾县| 宜春市| 嘉善县| 永昌县| 信宜市| 静乐县| 开平市| 嘉义县| 金山区| 望谟县|