1000KN (1MN) / 2000KN (2MN) STATIC COMPRESSION ONLY LOADFRAME
Product Code : 1MN or 2MN
The GDS Static Loadframe is actuated from the base by a Hydraulic actuator at loads up to either 1000kN or 2000kN. To increase efficiency and to reduce whole life costs the actuator is powered by a 200cc / 64MPa GDS advanced pressure controller.
This efficiency means that the full load of the frame, 1MN, can be achieved by drawing less than 1000Watts (1 or 2 kW) from mains electricity in place of a hydraulic power pack which can draw up to 30kW.
|
Key features |
Benefits to the user |
|---|
|
To increase efficiency and to reduce whole life costs the actuator is powered by a 200cc / 64MPa GDS Advanced pressure controller: |
This efficiency means that the full load of the frame can be achieved by drawing less than 1000 Watts (1kW) from mains electricity in place of a hydraulic power pack which can draw up to 50kW. Control is carried out by a GDS advanced pressure controller and as such is very stable and accurate. No special requirements are needed to host or service a powerpack or to protect system users from noise generated by a powerpack. |
|
The static frame uses low pressure compressed air on the reverse side of the actuator to raise the actuator post compression: |
This allows a simple manual regulator to be set with a small pressure in the upper chamber of the actuator. This innovation allows lower stress testing to be carried out more efficiently and more accurately without the cost implications of using a second pressure controller for the upper chamber of the actuator. Once the regulator is set it can then be left unattended for all tests, so long as a supply of clean, dry compressed air is available at a pressure greater than 0.5MPa (5Bar). |
|
Ideal for creep and relaxation testing: |
Ideal for use where displacements are very small and loads needs to be very stable and well controlled. |
|
Infinite Volume Controller option: |
For tests where continuous displacement is required to amplitudes greater than 5mm. |
|
Actuators |
Hydraulic |
|---|
|
Dimensions |
Frame footprint 700mm x 600mm. Height 1850mm |
|---|
|
Displacement Range |
100mm |
|---|
|
Load Range (kN) |
1000kN / 2000kN |
|---|
|
Weight Approx (kg) |
1725 |
|---|
Enquiry:hkmarketing@epc.com.hk 
Whatsapp Enquiry: +85261990717
